Clogged drains are nothing but a nuisance. At some point, you will likely find yourself clicking the internet to figure out how to fix the problem. When your shower or sinks suddenly refuse to drain the water, often your gut reaction might be to hire a plumber to do the drain cleaning job, but little did you know, the solution only takes a quick, painless process that most people can manage by themselves. If you want to know how to say goodbye to clogs on a budget, here are some tips you can give a shot. These easy tips are proven to get your clogged drains working like new again.
#1. Using a plunger
A Plunger has been tried-and-tested when it comes to unclogging sinks and shower drains. They come in different types, but all of them work similarly. To use a plunger to clear clogs, hold the handle straight up and start plunging with a rapid thrust to exert sufficient pressure down the drain and loosen the clogs. Make all effort to keep a good seal throughout the motion. You can achieve this by adding petroleum jelly to the suction rim. Your telltale sign that you have successfully cleared the clog is when the water is starting to drain. A plunger is an efficient tool, but it also turns out to have a low success rate on clogs that are tough enough.
#2. Using boiling water
There is no secret to making boiling water, but if you want to cut short on the waiting time, add salt to help make it boil faster. Make sure that it is boiling out from your pot before you pour it down your drains as this proves to effectively eliminate clogs when the cause is grease, hardened fats, and oil elements. Squirting a small amount of dish soap before pouring the boiling water can help loosen the grease away, but bear in mind that whilst it has proven to do magic for grease particles, this can also put the pipes, and seals in danger for melting.
#3. Using baking soda mixture
For only a few bucks, you can make your sink clog-free with baking soda mixture. The only challenge sometimes is how to clear the standing water. Clearing of the standing water is necessary for the soda mixtures to work. If you cannot get it to drain, manage to scoop it up with a water dipper, then pour about 8 ounces of baking soda, followed by the same amount of vinegar. Alternatively, you can also combine a cup of baking soda and half a cup of salt. It is advisable to do this before bedtime since the mixture should be allowed to sit in the sink overnight. Finally, pour 2 cups of boiling water to complete the process. If you notice the sink is starting to empty, pour water until all the clogs have cleared away.
#4. Using an auger
An auger or a plumber’s snake is another budget-wise tool for fixing clogged drains. Auger is efficient, but if you are not comfortable in using it, you might want to skip an auger as your option. While they work wonders at unclogging drains, when improperly used can damage your pipes. Insert the auger end down the drain and start rotating the handle; the auger moves farther down as you do this. Repeat the process until you can feel the resistance successfully dislodged.
#5. Using a metal type hanger
Without a doubt, hanger comes in handy and is surprisingly effective when clearing weak clogs. At no cost at all, metal hangers can be a good alternative for an auger for clogs that have not gone far down. Stretch out a hanger with your hands or plier until it is straightened and sturdy enough. Leave the hook end and wrap it with a rag to avoid leaving scratches in your toilet or sink. Work your way by moving the wire hanger in a circular motion. Push the end with the rag down to see if you can get any clogs disappeared. Refrain from using too much pressure as you might end up with a rag stuck in the drain and make the problem even more tricky to repair. You would be surprised to fish different sorts of nasty stuff with this budget-friendly tool.
Many property owners have become well-rounded when it comes to minor plumbing issues at home, which is good. But there are various aspects in plumbing that a blocked drain Sydney specialist considers before carrying out any repair where no DIYers can anticipate. Whilst it is good to keep the blocked drain repair experts out the door to save on costs, hiring them for drain cleaning no doubt still proves to be the best way to go.
Why hiring a blocked drain sydney expert is the best option to clear clogs?
A blocked drain cleaning Sydney professionals are experts in different types of clogs, whether a blocked toilet, blocked sewer pipe, blocked sewer drain, or blocked stormwater drains; it just goes to show that you can trust them with your drain problems. They understand the drains’ layout, how they work and how to fix them properly, so they do not recur.
Hiring blocked drain repair specialised people to do drain cleaning is not expensive contrary to what people usually think. The process reduces the chances of a leak and other further damage. Property owners who tend to delay or stay away from professional drain cleaning, suffer the worst damage and in the end, only spend more money on fixing the same.
Benefits of Professional Blocked Drain Repair
- Keep pipes in good condition
- Reduces chances of a leak and future clogs
- Improves water flow